Lenovo ThinkSystem SD650 Manual

Also see for 5468: Setup guide Quick start

Update the XCC firmware to a version that the server supports. Important: Some cluster solutions requirespecific code levels or coordinated code updates. If the device is part of a cluster solution, verify that thelatest level of code is supported for the cluster solution before you update the code.• FQXSPBR4002I: Management Controller [arg1] Reset was caused by restoring default values.This message is for the use case where a Management Controller has been reset due to a user restoringthe configuration to default values.Severity: InfoServiceable: NoAutomatically notify Support: NoAlert Category: System - OtherSNMP Trap ID: 22CIM Prefix: IMM CIM ID: 0032User Action:Information only; no action is required• FQXSPBR4003I: Platform Watchdog Timer expired for [arg1].This message is for the use case when an implementation has detected a Platform Watchdog TimerExpiredSeverity: ErrorServiceable: NoAutomatically notify Support: NoAlert Category: System - OS TimeoutSNMP Trap ID: 21CIM Prefix: IMM CIM ID: 0039User Action:Complete the following steps until the problem is solved:1. Reconfigure the watchdog timer to a higher value.2. Make sure that the XCC Ethernet-over-USB interface is enabled.3. Reinstall the RNDIS or cdc_ether device driver for the operating system.4. Disable the watchdog.5. Check the integrity of the installed operating system.• FQXSPBR4004I: Server timeouts set by user [arg1]: EnableOSWatchdog=[arg2],OSWatchdogTimout=[arg3], EnableLoaderWatchdog=[arg4], LoaderTimeout=[arg5].A user configures Server TimeoutsSeverity: InfoServiceable: NoAutomatically notify Support: NoAlert Category: System - OtherSNMP Trap ID: 22CIM Prefix: IMM CIM ID: 0095User Action:Information only; no action is required• FQXSPBR4005I: Management Controller [arg1]: Configuration saved to a file by user [arg2].A user saves a Management Controller configuration to a file.26 ThinkSystem SD650 Dual Node DWC Tray and NeXtScale n1200 DWC Enclosure Messages and Codes Reference