Lenovo ThinkSystem SD650 Dual Node DWC Tray Quick Start Manual

ThinkSystem SD650 Dual Node DWC Trayand NeXtScale n1200 DWC EnclosureType 7X58 and 5468Quick StartPN: SP47A36245Printed in ChinaYour shipping box contains the following items:⚫ n1200 DWC Enclosure⚫ SD650 Dual Node DWC tray (up to six, installed in the enclosure)⚫ Material box, including printed documentationIf any item is missing or damaged, contact your place of purchase.Ensure that you retain your proof of purchase and packing material.They might be required to receive warranty service.First glanceTray front view:Server front viewLeft node (odd bay numbers) Identification LED (blue)Right node (even baynumbers) Power button/LED (green)Dedicated RJ45 port forLenovo XClarity Controlleraccess1Gb Ethernet RJ45 portUSB 3.0 connector KVM breakout cableconnectorSystem error LED (yellow) Tray labelNote:Depending on the configuration, the illustration above might differslightly from your server.Enclosure rear view:Server rear viewPower supply Drip sensor assemblyFan and Power ControlModule ManifoldSetting up the System1. Install the required solution components.2. Install the enclosure into the rack.See the Rack Installation Guide that was provided with the rail kit.3. Connect the cables.4. Connect the management controller to the network.5. Power on the nodes.6. Configure the system.For detailed information about installing hardware options andconfiguring the system, see the following website:http://thinksystem.lenovofiles.com/help/topic/SD650/introduction.html

/ 2

Related manuals for Lenovo 5468