Lenovo ThinkSystem SD650 Manual

Also see for 5468: Setup guide Quick start

Table 2. Events organized by severity (continued)Event ID Message String SeverityFQXSPDM4007I User [arg1] has imported a signed certificate for the TKLM client from[arg2].InformationalFQXSPDM4008I User [arg1] has imported a server certificate for the TKLM server. InformationalFQXSPDM4009I User [arg1] has [arg2] file [arg3] from [arg4]. InformationalFQXSPDM4010I Inventory data collecting and processing complete for [arg1],sequence number is [arg2].InformationalFQXSPDM4011I EKMS server protocol set by user [arg1]: TKLMServerProtocol=[arg2].InformationalFQXSPDM4012I User [arg1] has changed the polling configuration for the keymanagement server.: Polling enabled=[arg2] Interval=[arg3]InformationalFQXSPDM4013I User [arg1] has changed the caching configuration for the keymanagement server: Caching enabled=[arg2] Interval=[arg3]InformationalFQXSPEM0003I The Log [RecordLogElementName] has been cleared. InformationalFQXSPEM0004I The Log [RecordLogElementName] is full. InformationalFQXSPEM0005I The Log [RecordLogElementName] is almost full. InformationalFQXSPEM0009I The System [ComputerSystemElementName] has generated anauxiliary Log Entry in Log [RecordLogElement].InformationalFQXSPEM4000I The [arg1] on system [arg2] cleared by user [arg3]. InformationalFQXSPEM4001I The [arg1] on system [arg2] is 75% full. InformationalFQXSPEM4002I The [arg1] on system [arg2] is 100% full. InformationalFQXSPEM4003I LED [arg1] state changed to [arg2] by [arg3]. InformationalFQXSPEM4004I SNMP [arg1] enabled by user [arg2] . InformationalFQXSPEM4005I SNMP [arg1] disabled by user [arg2] . InformationalFQXSPEM4006I Alert Configuration Global Event Notification set by user [arg1]:RetryLimit=[arg2], RetryInterval=[arg3], EntryInterval=[arg4].InformationalFQXSPEM4007I Alert Recipient Number [arg1] updated: Name=[arg2],DeliveryMethod=[arg3], Address=[arg4], IncludeLog=[arg5], Enabled=[arg6], EnabledAlerts=[arg7], AllowedFilters=[arg8] by user [arg9] from[arg10] at IP address [arg11].InformationalFQXSPEM4008I SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2],AllowedFilters=[arg3] .InformationalFQXSPEM4009I The UEFI Definitions have been changed. InformationalFQXSPEM4010I UEFI Reported: [arg1]. InformationalFQXSPEM4011I XCC failed to log previous event [arg1]. InformationalFQXSPEM4012I User [arg1] made system [arg2] Encapsulation lite Mode. InformationalFQXSPEM4013I Battery error was detected by RAID controller. The battery unit needsreplacement.([arg1],[arg2],[arg3],[arg4],[arg5])InformationalFQXSPEM4014I The RAID controller has problem with the battery. Please contacttechnical support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5])InformationalChapter 2. XClarity Controller events 9