Screen 5-9COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 11 TROUBLESHOOTING11-2529/9ItemSCAN_SEL2SIDE_SLM-LENGTHPO-CNTMDDescriptionUse it to enable or disable the original sizedetection function for the RDF.ON: If the selected mode does not require detectionof original size (APS, AMS, frame erasing,etc.), correction is made when assuming anoriginal size considering the paper size and theselected ratio.Use it to specify two-sided mode as the standardmode (one-sided to two-sided). If '0' is selected, thenotation "two-sided" will not be indicated unless'initialize standard mode' is selected in user mode.Use it to register a non-default size for themultifeeder.Note:Copies may be made only when the sorter isnot installed. (Otherwise, a sorter jam willoccur because of a paper length not suitedto the sorter.)Use it to enable or disable potential control for thefirst copying operation at power-on, after 10 min,and after 60 min.Remarks0: OFF1: ON0: OFF1: ON432 to 600 mm0: ON1: OFF
