COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 5-414321OriginalsScannerFixing rollerDrumRegistrationrollerHolding tray342143421124342124343421244342142231424422314443124343 2 4224324314434413222432413242122142314432212314434321214343432214343432121432121214343RDF1) The Copy Start key is pressed. (The originals moveas in right pick-up operation of the RDF.)2) The 4th original is picked up. 3) The 4th original is copied. The 3rd original is not copied(skipped), and is returned to the original tray of the RDF4) The 2nd original is picked up.6) The 4th original is picked up. 7) The 4th original is copied (for 2nd copy). 8) The 3rd original is picked up. 9) The 3rd original is copied on the back of 4th copysheet picked up from the holding tray.10) The 2nd original is picked up.11) The 2nd original is copied (2nd copy). 12) The 1st original is picked up. 13) The 1st original is copied on the back of the 2nd copy sheet picked up from the holding tray. The 4th original isnot copied (skipped), but is returned to the original tray of the RDF. (If making two copies each, repeats steps6 through 13.)15) The 3rd original is copied (2nd copy) on the back ofthe 4th copy sheet picked up from the holding tray.The 2nd original is not copied (skipped), but isreturned to the original tray of the RDF.16) The 1st original is picked up. 17) The 1st original is copied (2nd copy) on the back ofthe 2nd copy sheet picked up from the holding tray.18) The operation ends.14) The 3rd original is picked up.5) The 2nd original is copied. The 1st original is notcopied (skipped), but is returned to the original tray ofthe RDF. At this time, the machine assumes that thereis an even number of originals. (If making one copyeach, goes to step 14.)3. Skipping Operation (odd number of originals)Figure 5-620
