5. Adjusting the Height of the Charging WireFigure 4-332Reference:The height (position) of the primary and the transfer charging wires may be adjustedby turning the screw behind the charging assembly. A full turn of the screw changesthe position of the charging wire by about 0.7 mm.COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 4 IMAGE FORMATION SYSTEM4-58Charging assemblyPrimaryPre-transferTransferSeparationTolerance± 1mmNomechanism± 2mm± 2mmHeight of charging wire16.2±0.5mm 14.9±0.5mm10.2±0.5mm9.5 +1.0- 0 mm7.5 +1.5-0 mm7.5 +1.5- 0 mm ABCD
