COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV.0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 1 GENERAL DESCRIPTION1-15C. User Mode1. Types of User ModesThe machine provides the following four types of user modes:1. Settings2. Adjust/Clean3. Timer4. Preference[1] SettingsTable 1-402(a)ItemAuto SortSorter FrontAccessSkipFeeder ManualFeed Auto StartAuto CassetteChange/APSManual SizeSelectionDescriptionsUse it to enable or disable auto sort mode inresponse to multiple originals (count of 2 or more)when the RDF is used.When the sorter is connected,ON: Enable sorter auto front access.OFF: Disable sorter auto front access.Use it to enable or disable skip copying to avoidwrong orientation of mirror originals (holes onodd/even-numbered pages).ON: Enable skip copy.OFF: Disable skip copy.Use it to enable or disable auto start when the RDFis used for manual feeding (whether copying shouldstart immediately after pulling in an original or aftera press on the Copy Start key).ON: Enable auto start.OFF: Disable auto start.Use it to enable or disable auto cassettechange/APS when the selected cassette runs out ofcopy paper to a cassette holding same-size paperin continuous copying.ON: Enable auto cassette change/APS.OFF: Disable auto cassette change/APS.Use it to show or not show the multi feeder sizeinput screen when the multifeeder is selected as thesource of paper.ON: Show size input screen.OFF: Do not show size input screen.RemarksDefault: ONDefault: ONPaper: A4,B5, LTR inhorizontal feedDefault: ONDefault: ONDefault: ONDefault: OFF
