5. Removing the External Delivery Paper Sensor and the Internal Delivery PaperSensor1) Remove the external delivery roller.2) Remove the two mounting screws q; then, remove the external delivery sensorassembly and the internal delivery sensor assembly w.Figure 6-2386. Removing the Fixing Assembly Outlet Paper Sensor Assembly1) Slide the fixing/feeding unit to the front; then, remove the front over and the fixingassembly upper unit. (See p. 6-23.)2) Remove the fixing assembly lower separation claw assembly. (See p. 6-31.)3) Remove the mounting screw q, and slide the fixing assembly outlet paper sensorassembly w to the right; then, disconnect the connector e (J108), and remove thesensor.Figure 6-239qweqwCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 6 FIXING SYSTEM6-39
