3. Removing the Fixing/Feeding Assembly Locking Assembly1) Slide the fixing/feeding assembly unit to the front and out of the copier.2) Remove the two mounting screws q and E-ring w; then, disconnect the connectore, and remove the fixing/feeding locking assembly r.Figure 6-2354. Removing the External Delivery Roller1) Slide the fixing/feeding assembly unit to the front and out of the copier.2) Remove the fixing/feeding assembly front cover.3) Remove the two mounting screws q, and remove the delivery roller guide w.Figure 6-236q qwqwerCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 6 FIXING SYSTEM6-37
