E. Electrical System1. Removing the Side Deck Driver PCB1) Detach the deck from the copier; then, remove the six screws, and remove the rearcover.2) Disconnect the 10 connectors q, and remove the four screws w; then, remove thedeck driver PCB e.Figure 8-5002. Removing the OPEN Switch PCB1) Detach the deck from the copier, and push down the latch plate w of thecompartment q with a finger to open the compartment.Figure 8-501(rear)qwqweCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 8 PAPER DECK-A18-49
