7. Orientation of the Feeding Roller of the Cassette/Deck Pick-Up AssemblyWhen installing the feeding roller assembly q to the cassette/deck pick-upassembly, make sure that the belt pulley w is toward the front of the copier.When installing the feeding roller e to the feeding roller shaft r, make sure that themarking “5” t faces the front of the copier.q Feeding roller assembly r Feeding roller shaftw Belt pulley t Marking (roller)e Feeding rollerFigure 5-8438. Positioning the Pick-Up Roller Releasing Solenoid of the DeckAs shown in Figure 5-844, adjust the position of the solenoid so that the left end ofthe right solenoid arm 2 is 57.2 ±0.5 mm from the center of the hole A in the solenoidmount.Figure 5-844A57.2±0.5mmw qr55et(front)COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-86
