3. Removing the Feeding Roller1) Remove the pick-up assembly from the copier.2) Remove the screw w, and remove the feeding roller cover q.3) Remove the stop ring e from the front of the feeding roller.4) Remove the stop ring r and the pick-up roller t at the front; then, remove thefeeding roller u together with the timing belt y.Figure 5-8374. Removing the Separation Roller1) Remove the two mounting screws, and remove the feeding guide plate w; then,remove the open/close guide e.Figure 5-838qweqwer t yuCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-82
