7. Removing the Internal Delivery Assembly Roller1) Open the front door, and slide the fixing/feeding unit to the front and out of the copier.2) Remove the fixing/feeding assembly front cover.3) Remove the fixing assembly upper unit. (See p. 6-23.)4) Remove the fixing assembly lower separation claw assembly. (See p. 6-31.)5) Remove the E-ring q, gear w, and parallel pin e at the front.6) Remove the E-ring r and the bushing t.Figure 6-2407) Remove the E-ring y and the gear u at the rear.8) Remove the E-ring i and the bushing o.Figure 6-2419) Remove the fixing assembly outlet paper sensor assembly. (See p. 6-39.)10) Remove the internal delivery roller.y ui oqwer tCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 6 FIXING SYSTEM6-40
