2. Removing the Thermal Fuse1) Remove the copyboard glass retainer, and remove the copyboard.2) Remove the control panel.3) Remove the scanning lamp.4) Move the No. 1 mirror mount to the right end.5) Remove the two mounting screws q, and remove the thermal fuse w.Figure 4-303B. Standard White Plate1) Remove the RDF.2) Remove the rear cover.3) Remove the two mounting screws q, and remove the copyboard glass rightretaining plate w.Figure 4-304qwq qwCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 4 IMAGE FORMATION SYSTEM4-41
