G. Fixing/Waste Toner Drive Assembly1. ConstructionFigure 7-4402. Removing the Waste Toner Bottle1) Remove the two mounting screws, and remove the lower right cover; then, removethe waste toner bottle toward the multifeeder.3. Removing the Fixing/Waste Toner Drive Assembly1) Open the front door, and draw out the process unit, the fixing/feeding unit, and theholding tray assembly about 10 cm from the copier.2) Remove the rear cover.3) Remove the high-voltage transformer PCB.4) Remove the cleaner fan and the feeding fan.5) Remove the waste toner bottle.COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-35
