q Feeding roller assembly r Feeding roller shaftw Belt pulley t Marking (roller)e Feeding rollerFigure 5-854E. Pick-Up Vertical Path Roller Assembly1. Removing the Pick-Up Vertical Path Roller Assembly1) Open the upper right door and the lower right door.2) Remove the right deck pick-up assembly/cassette pick-up assembly.3) Remove the two mounting screws q, and disconnect the connector; then, removethe pick-up vertical path roller assembly w.Figure 5-855q qww qr55et(front)COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-92
