14. Positioning the Holding Tray Paper Deflecting Plate Drive SolenoidInstall the solenoid so that its stroke (distance between rubber silencer and solenoidedge) is 5.0 ±0.3 mm.Figure 5-89215. Removing the Side Guide Plate Assembly1) Mark the position of the side guide plate with a pencil or the like. (See Figure 5-901.)2) Remove the two mounting screws q, and disconnect the two connectors; then,remove the side guide plate assembly w.Figure 5-893qqw5.0±0.3mmCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-112
