3. Removing the Fixing/Feeding Unit Front Cover1) Open the front door, and slide out the fixing/feeding unit.2) Remove the screw q of the releasing lever; then shift and remove the releasinglever w while pushing the rear of the releasing lever locking shaft (closer to theinside of the fixing/feeding assembly).3) Remove the mounting screw e, and remove the fixing knob r.4) Remove the three mounting screws t, and remove the fixing/feeding assembly frontcover y.Figure 7-4074. Removing the Rear Cover1) Remove the nine mounting screws q, and remove the rear cover w.Figure 7-408q qqwqqqwertttyCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-17
