M. Cassette Pick-Up Drive Assembly1. ConstructionFigure 7-4612. Removing1) Open the front door, and slide out the holding tray assembly about 10 cm from thecopier.2) Remove the rear cover.3) Remove the waste toner bottle.4) Remove the waste toner bottle support plate.5) Remove the rear right bottle support plate.6) Remove the DC controller PCB, and detach the timing belt.COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-48
