6. Removing the Feeding Fan1) Remove the rear cover.2) Remove the three mounting screws, and shift the high-voltage transformer PCB.3) Remove the cleaner fan.4) Remove the two mounting screws q, and disconnect the connector w; then, removethe feeding fan e.Figure 7-437E. Removing the Counter Assembly1) Open the front door, and remove the inside upper cover; then, remove the mountingscrews from the control panel.2) Remove the mounting screw q, and disconnect the two connectors w; then, removethe counter assembly e together with the support plate.Figure 7-438qwweqweCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-33
