COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV.0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 1 GENERAL DESCRIPTION1-16Table 1-402(b)ItemInch InputWait TimeIndicatorBuzzer ON/OFFJust Fit RatioJust Fit CenterJust Fit Non-ImagePre-HeatInitialize SettingsStandard ModeChangeDescriptionsUse it to enable or disable inch input when selectingbinding width, hole margin width, and zoomprogram.ON: Enable inch input.OFF: Disable inch input.Use it to show or not show how long the on-goingcopying takes.ON: Show.OFF: Do not show.Use it to specify whether the buzzer should besounded in response to inputs, warnings, standby,and copying end.ON: Enable the buzzer.OFF: Disable the buzzer.Use it to select the reproduction ratio for the just fitfunction between 90% and 99% in 1% increments.Use it to enable or disable centering in just fit mode.ON: Enable centering.OFF: Disable centering.Use it to enable or disable non-imaging in just fitmode.ON: Enable non-imaging.OFF: Disable non-imaging.Use it to select a power saving rate in pre-heatmode.10%: at 10%25%: at 25%50%: at 50%No resetting: no saving (at 0%)Use it to initialize user mode settings.Use it to store the mode to be selected in responseto a press on the Reset key (or in auto clear). Youmay select factory default as post-initializationmode.RemarksDefault: OFFDefault: OFFDefault: ONDefault: 93%Default: ONDefault: OFFA saving rate isin relation to themachine’s totalconsumption.Default: Noresetting.DefaultCopy ratio,100%; autopaper select,ON; densitycontrol, manual;copy count, 1.
