Canon JX500 User Manual

Also see for FAX JX200: Manual Easy Setup instructions User guide User guide Service manual

Contents

Canon JX500 User Manual Manual pdf 84 page image

80 AppendixENGLISHAppendixUsers in Canada Pre-Installation Requirements for Canon Facsimile EquipmentA. LocationSupply a suitable table, cabinet, or desk for the machine. See the Appendix for the machine’sspecific dimensions and weight.B. Order Information1. Provide only a single line touch-tone or rotary telephone set terminated with a standard 6-pinmodular telephone plug. (Touch-tone is recommended if available in your area.)2. Order a CA11A modular wall jack, which should be installed by the telephone company. If theCA11A modular wall jack is not present, installation cannot occur.3. Order a normal business line from your telephone company’s business representative. Theline should be a regular voice grade line or an equivalent one. Use one line per machine.DDD (Direct Distance Dial) line-or-IDDD (International Direct Distance Dial) line if you communicate overseasC. Power RequirementsThe power outlet should be a two-prong grounded receptacle (Single or Duplex). It should beindependent from copiers, heaters, air conditioners or any electric equipment that isthermostatically controlled. The rated value is 120 volts and 15 amperes. The CA11A modularjack should be relatively close to the power outlet to facilitate installation.NoticeThis equipment meets the applicable Industry Canada terminal Specifications.AvisLe présent matériel est conforme aux spécifications techniques applicables d'Industrie Canada.Before installing this equipment, users should ensure that it is permitted to be connected to thefacilities of the local telecommunications company. The equipment must also be installed using anacceptable method of connection. In some cases, the company's inside wiring associated with asingle-line individual service may be extended by means of a certified connector assembly(telephone extension cord). The customer should be aware that compliance with the aboveconditions may not prevent degradation of service in some situations.The Ringer Equivalence Number is an indication of the maximum number of devices allowed tobe connected to a telephone interface. The termination on an interface may consist of anycombination of devices subject only to the requirement that the sum of the RENs of all the devicesdoes not exceed five.Even if the dual-line option is installed, the REN is applicable to each port.AvisL'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux quipeuvent être raccordés à une interface téléphonique. La terminaison d'une interface peutNoteCanon recommends an individual line following industry standards, such as the 2500 (touch-tone) or 500(rotary/pulse dial) telephones. A dedicated extension off a PBX (Private Branch Exchange) unit without“Call Waiting” can be used with your facsimile unit. Button telephone systems are not recommendedbecause they send non-standard signals to individual telephones for ringing and special codes, which maycause a fax error.