Canon JX500 User Manual

Also see for FAX JX200: Manual Easy Setup instructions User guide User guide Service manual

Contents

Canon JX500 User Manual Manual pdf 54 page image

50 Settings and Activity ReportsENGLISH USER SETTINGS REPORT SETTINGSName Description SettingsDATE & TIME Set the date and time (24-hour clock) using the numericbuttons.–UNIT TELEPHONE # Enter your fax number using the numeric buttons. –UNIT NAME This is the name that appears at the top of each fax page yousend (see page 11).–TX TERMINAL ID This option sets the parameters for the identification headerthat appears on every page you send.ON/OFFFAX/TEL No. MARK Select the icon for the fax number. FAX/TELTTI POSITION Select the position of the TTI. OUTSIDE IMAGE/INSIDE IMAGESCAN CONTRAST Set the density of the reproduction. STANDARD/DARKER/ LIGHTEROFFHOOK ALARM Enable/disable the off hook alarm. The alarm alerts you thatthe Handset is not seated properly in its cradle.ON/OFFVOLUME CONTROL Set the volume of the fax sounds. –CALLING VOLUME Set the volume of the ring sound. 0 (off)/1/2/3LINE MONITOR VOL Set the volume of the line monitor (sound during dialing). 0 (off)/1/2/3ALARM VOLUME Set the volume of the error alarm sound. 0 (off)/1/2/3KEYPAD VOLUME Set the volume of the keypad. 0 (off)/1/2/3HANDSET VOLUME* Set the volume of the Handset. This setting can be changedduring a call, with []] or [_].1/2RX CALL LEVEL Set the ring tone. STANDARD/HIGHTEL LINE TYPE** Set the dialing method the fax uses to match the type ofphone line you have.TOUCH TONE/ROTARY PULSECOPY RATIO Set the enlargement and reduction and ratio for copying. 100% AS IS/86%/70%/50% MIN/200% MAX/141%/115%DIAL SECURITY Enable/disable the dial security. When it is ON, it will ask youto dial the number twice to prevent dialing the wrong number.The fax will dial the number after confirming the number youdialed in twice are matched.ON/OFF* Only available in some countries.** In Australia and New Zealand, select . You cannot use .Name Description SettingsTX REPORT Enable/disable automatic printing of the transmission report.PRINT ERROR ONLY: Print only when an error occurs during sending. -ATTACH TX IMAGE:Print a transmission report attaching itsimage.YES/NOOUTPUT YES: Set the fax to print a transmission report every time you senda document.ATTACH TX IMAGE:Print a transmission report attaching itsimage.YES/NOOUTPUT NO: Turn off the transmission report feature. -RX REPORT Enable/disable automatic printing of the reception report. PRINT ERROR ONLY/OUTPUT YES/OUTPUT NO