|
34 Receiving FaxesENGLISH4 Dial the fax number of the fax machine you wish to poll.Use one of the dialing methods* described.5 Press [Start].Your fax begins receiving the document.Setting CALLER IDIf the setting is set to , the caller’s name and phone/fax number appear on theLCD when you receive a call. You can also set the fax to reject unwanted calls (FAX-JX500/JX300only).1 Press [Menu].2 Use []] or [_] to select , then press [Start].3 Use []] or [_] to select , then press [Start]. The LCD displays.z To disable Caller ID feature, use []] or [_] to select , then press [Start]. Press[Stop] to return to standby mode.z To enable Caller ID feature, use []] or [_] to select and continue with the stepsbelow.4 Press [Start].5 Use []] or [_] to select the type of setting (FAX-JX500/JX300 only) you want, then press [Start].You can select from the followings:z : The fax rejects calls from any callers who have blocked their phone/faxnumber from the Caller ID service.z : The fax rejects calls from specific phone/fax numbers you place in list.z : The fax rejects calls from any callers in an area that does not have theCaller ID service.z : Determine if the fax stores phone/fax number for rejected calls inmemory.Notez is only available in some countries.z To use this feature, you will need to subscribe for a Caller ID service (only available in some countries).The Caller ID feature uses the ETSI EN 300 778-1 protocol. Contact your local telephone company fordetailed information on this service.TEL= 3456xxxx
|
