Canon JX500 User Manual

Also see for FAX JX200: Manual Easy Setup instructions User guide User guide Service manual

Contents

Canon JX500 User Manual Manual pdf 31 page image

27Sending FaxesENGLISHSequential Broadcasting Sending a Document to More Than One LocationSequential broadcasting sends one document to more than one location.You can send to a total of 110 locations (70 locations for the FAX-JX200/JX201 models) asfollows:You can enter the one-touch speed dialing and coded speed dialing locations in any order. Yousimply press the one-touch speed dialing button, or press [Coded] or [Directory] followed by the two-digit code.You can also include one location using regular dialing. Remember that when using regular dialing,you must press [Start] after entering the number.1 Load the document face up into the Document Tray.See “Loading Documents and Paper” on page 16.You can set the scanning resolution and contrast (see page 20).2 Dial the receiving party’s fax numbers as you need.You can also press [Redial] to redial the last number dialed with the numeric buttons.3 Press [Start].z The fax reads the document into memory and begins sending.z To cancel a transmission, press [Stop] during dialing or transmission. All transmissions inthe sequence are canceled.z One-touch speed dialingz Coded speed dialingz Regular dialing (Numeric buttons dialing)= 9 locations= 100 locations (60 locatitons for theFAX-JX200/JX201 models)= 1 locationNotez You must press each button within 10 seconds of the preceding one. The fax begins the operationapproximately 10 seconds after you press the last button.z The regular dialing number must be entered last.TEL= 3456xxxx