|
23Sending FaxesENGLISH1 Press [Caller History], then wait for 2 seconds or press any button.The numbers, names, and date and time from which you have received calls recently will bedisplayed on the LCD.z Press [Redial] or [Coded Dial/Directory] to switch between the date and time, name, andphone/fax number on the LCD.2 Use []] or [_] to select the receiving party, then press [Start].The fax begins calling the number. Switching Temporarily to Tone DialingMany information services for banks, airline reservations, hotel reservations, etc. require tonedialing for their services. If your machine is connected to a rotary pulse line, you can set themachine to temporarily switch to tone dialing.1 Press [Hook] or lift the handset.2 Use the Numeric buttons to dial the number of the information service.3 When the recorded message of the information service answers, press [Tone] ([ ])to switch to tone dialing.If you pressed [Hook] in step 1 and wish to talk to the other party, lift the handset.4 Use the Numeric buttons to enter the numbers requested by the informationservice.5 When you have finished using the service, press [Hook] or hang up the handset. Long-Distance DialingWhen you register a long-distance number, you may have to insert a pause within or after thenumber. For long-distance dialing, the location and length of the pause may differ depending onthe telephone system. To enter a pause, press [Pause]. The length of this pause can beadjusted. See on page 51. A pause at the end of a number is fixed at 10seconds.Redialing When the Line is BusyThere are two methods of redialing: manual redialing and automatic redialing. This section explainsthese two methods. Manual RedialingPress [Redial] to dial the last number you dialed with the numeric buttons*. (This starts redialingregardless of whether automatic redialing is enabled.)*This setting is only available when you dialed with the numeric buttons.01: 3456XXXX ? CANON 20/12 2006 13:30?
PreviousNext |