Canon JX500 User Manual

Also see for FAX JX200: Manual Easy Setup instructions User guide User guide Service manual

Contents

Canon JX500 User Manual Manual pdf 33 page image

29Receiving FaxesENGLISHSetting the Receive ModeOnce you have decided which mode is suitable for your needs, set the mode by pressing [ReceiveMode/Resolution].1 Press [Receive Mode/Resolution].Every time you press [Receive Mode/Resolution], the mode changes cyclically. Receiving Faxes Receiving Both Documents and Telephone Calls Automatically: Fax/TelModeIf you set Fax/Tel mode, you can control precisely how the fax handles incoming calls byadjusting the following settings:z Adjust the time the fax takes to check whether a call is from a fax machine or a telephone( setting).z Adjust the length of time the fax rings when the call is a voice call (setting).z Set whether the fax switches to receive mode after the ring time set in haselapsed ( setting).1 Press [Menu].2 Use []] or [_] to select , then press [Start]. The LCDdisplays .3 Use []] or [_] to select , then press [Start]. The LCD displays.4 Use []] or [_] to select , then press [Start]. The LCDdisplays .5 Press [Start].6 Use the numeric buttons, or []] or [_] to enter the time the fax waits before ringingwhen it receives a call, then press [Start] twice.7 Use the numeric buttons, or []] or [_] to enter the time the fax rings while waitingfor someone to pick up the Handset, then press [Start] twice. The LCD displays.Notez If paper jams, see “Troubleshooting” on page 66.z If the Ink Lamp lights up faxes will be received to memory.8SEC.22SEC.