Canon JX500 User Manual

Also see for FAX JX200: Manual Easy Setup instructions User guide User guide Service manual

Contents

Canon JX500 User Manual Manual pdf 71 page image

67TroubleshootingENGLISH2 Open the Printer Cover.3 Gently remove the jammed paper inside thefax.4 Press [Stop].The fax returns to standby mode.If the Power Disconnects UnexpectedlyThe date and time setting on your device and all documents stored in memory* will be kept.*All documents stored in memory will be deleted for the FAX-JX200/JX201 models.If the power disconnects, the following will apply:z You will not be able to send or receive faxes or make copies.z If a telephone is connected to the machine, you can receive voice calls.z Whether you are able to make voice calls or not depends on your telephone type.Paper Feeding Problems Paper Does Not Load Paper is Loaded Skewed (Printing is Skewed.)Cause ActionThe Multi-Purpose Tray may containtoo many sheets.Make sure the paper stack in the Multi-Purpose Tray does not exceed the paperlimit mark ( ) (see the Easy Setup Instructions).Paper may not be loaded correctly. Make sure the paper stack is loaded properly in the Multi-Purpose Tray, and thatthe paper guide is adjusted correctly (see the Easy Setup Instructions).Cause ActionPaper may not be loaded correctly. z Make sure the paper stack is loaded properly in the Multi-Purpose Tray, andthat the Paper Guide is adjusted correctly (see the Easy Setup Instructions).z Make sure the right edge of the paper stack is aligned with the right side ofthe Multi-Purpose Tray and the Paper Guide is aligned with the left edge ofthe stack (see the Easy Setup Instructions).z Make sure the paper exit path is clear.