|
41Using TAM Mode (FAX-JX500/JX300 only)ENGLISH4 Use []] or [_] to select , then press [Start]. The LCD displays.5 Use []] or [_] to select , then press [Start].6 Press [Stop].Setting ends and the fax returns to standby mode.Recording Voice MemosUse this feature when you are going out and want to leave a message for another member of thefamily. Use the Handset on the fax to record your voice memo.Only one voice memo, 60, 120, or 240 seconds*, can be recorded. If you record a new voice memowhen there is already a voice memo recorded, the old voice memo will be deleted.1 Press [Menu].2 Use []] or [_] to select , then press [Start].3 Use []] or [_] to select , then press [Start].4 Use []] or [_] to select , then press [Start]. The LCD displays HANDSET>.5 Pick up the Handset. Press [Start] and speak into the Handset to record your voicememo.The remaining recording seconds is displayed on the LCD.6 Press [Stop] when recording is finished. The LCD displays HANDSET>.7 Hang up the Handset and press [Stop].The fax returns to standby mode.* The recording time for a voice memo can be set to the same settings as the recording timefor a telephone message. However, if you set 0 as the recording time for each telephonemessage, voice memo recording time will be set to 60.NoteTo play a voice memo, carry out step 1 to 3, select and then press [Start].
|
