10 Before Using Your MachineENGLISHz To delete a character:(1) In number mode, press [=]. In uppercase or lowercase mode, use [=] or [?] tomove the cursor under the incorrect letter. Then press [Space].z To delete an entire entry:(1) Press [Clear].3 Continue entering other letters or numbers using the numeric buttons.4 When you have finished entering characters, press [Start] to register the entry.Setting the TEL LINE TYPEBefore using your fax, make sure it is set for the telephone line type of your telephone system. If youare unsure of your telephone line type, check with your local telephone company.1 Press [Menu].2 Use []] or [_] to select , then press [Start] twice. TheLCD displays .3 Use []] or [_] to select , then press [Start]. The LCD displays.4 Use []] or [_] to select the telephone line type, then press [Start].You can select or .5 Press [Stop].Setting ends and the fax returns to standby mode.NoteIn Australia and New Zealand, select . You cannot use .
