Canon JX500 User Manual

Also see for FAX JX200: Manual Easy Setup instructions User guide User guide Service manual

Contents

Canon JX500 User Manual Manual pdf 60 page image

56 Routine MaintenanceENGLISHRoutine MaintenanceMaintenance MenusThe table below shows the available maintenance menus when you press [Maintenance].Replacing a FINE CartridgeIf there is no improvement with the quality of printing following such maintenance as FINE CartridgeCleaning, the FINE Cartridge is probably empty. Replace the empty FINE Cartridge with a new one.When replacing a FINE Cartridge, check the model number very carefully.The machine will not print properly if the wrong FINE Cartridge is used, or installed incorrectly. Knowing When to Replace a FINE Cartridgez When Ink is LowWhen the ink level is low, the Ink Lamp lights up. In this state the FAX will receive documents tomemory (up to 30 transactions or 120 pages (FAX-JX200/JX201: 60 pages). You need to printout received faxes manually from the menu.After printing, delete unnecessary faxes from the memory. For more details, see “DocumentsStored in Memory” on page 36.z When Ink is EmptyWhen the ink is almost empty, the Ink Lamp blinks. When this occurs it may not be possible toclearly print received faxes from memory. Replace the FINE Cartridge with new one. For moredetails, see “Replacing a FINE Cartridge” on page 58.Printing will resume as soon as the FINE Cartridge is replaced.MenusCS CLEANING (see page 63)NOZZLE CHECK (see page 59)CLEANING (see page 60)DEEP CLEANING (see page 60)ALIGN PRINT HEAD (see page 61)HEAD ALIGN VALUE (see page 61)ROLLER CLEANING (see page 64)BOTTOM CLEANING (see page 64)PG-40 Black PG-50 Black