Toshiba Tosvert VF-S15 Instruction Manual

Also see for TOSVERT VF-S15 series: Function manual Quick start manual Instruction manual Instruction manual Manual

Contents

E6582175F-516[Setting of jog run mode (RES-CC)]Ex) Assign jog run mode to control terminal RES.Title Function Adjustment range Settingf113 Input terminal selection (RES) 0-203 18(Jog run mode)Note 1: During the jog run mode, low speed detection signal (LOW) is output but designated frequency reachsignal (RCH) is not output, and PID control does not work.Note 2: When only the operation panel is used for operation in jog run mode, the jog run function does not need tobe assigned to any input terminal.RES (JOG): ON + F:ON: Forward jog runRES(JOG): ON + R: ON: Reverse jog run( Frequency command + F: ON: Forward run , Frequency command + R: ON: Reverse run ) The jog run setting terminal (RES-CC) is enabled when the value of operation frequency is that of the jogrun frequency and below.This connection does not function when operation frequency exceeds the jog run frequency. The motor can be operated in jog mode while the jog run setting terminals are connected (RES-CC). Jog run has priority to new operation command given during operation. Even for f261 = 0 or 1, an emergency DC braking (f603 = 2) is prior to the setting. No limits are imposed to the jog run frequency by the upper-limit frequency (parameter ul).ST-CCF-CCR-CCRES-Frequency command inputReverseForwardForward0Set frequency(=18)Forward