Panasonic WJ-HD500 Operating Instructions Manual

Also see for WJHD500 - DIGITAL DISC RECORDE: Operating instructions Instructions Service manual

Contents

Panasonic WJ-HD500 Operating Instructions Manual Manual pdf 73 page image

75 Group Multi SequenceThe assigned group camera images can be displayed insuccession on the monitor screen for the specified dura-tion.Each sequence step can be displayed as either four screensegments (quad) or a minimum quantity of the segmentscreen, depending on the setting.Refer to GROUP SEQ MODE in the 5 - 1 SEQUENCESETUP for further details.1. Select one of the group displays by pressing theGROUP SELECT button.Pressing this button toggles the group display on themonitor as shown below.GROUPSELECT 1 29 156G1: Group 1G2: Group 2G3: Group 3G4: Group 4none: All Inputs2. Press the SEQUENCE button to run a sequence on themonitor screen starting from group 1.The display pattern varies according to the groupassignment and setting, shown below is an example ofmonitor displays.If the cameras are assigned to the group as follows:Group 1 Cameras 1, 2, 6, 9, 15Group 2 Cameras 3, 4, 5Group 3 Cameras 7, 8, 10, 11Group 4 Cameras 12, 13, 14,16354 710811121413161 26 9 1515 354710811121413161 2964. Press the SEQUENCE button to restart the sequenceforward from the step that was previously paused bypressing the SEQUENCE button.The indicator in the button changes to a steady light.5. To return to Spot monitoring, select an assigned cam-era image by pressing a numeric button so that theindicator in the button lights up.If you attempt to press any button other than the oneassigned to the camera, it will be ignored.Notes:• You can also enable the Auto Skip function to skipany steps when no video signal is present.(or a screen segment is blacked out on the multi-screen display.)Refer to the AUTO SKIP in the 5 - 1 SEQUENCESETUP for further details.• The setting can be adjusted in such a way that thesequence step for displaying an image on the SpotMonitor screen in the single spot mode can beskipped automatically.(or - on a multi-screen display - the screen segmentis blacked out.)Refer to the SECRET VIEW in the 5 MULTIPLEXERSETUP for further details.3. During the sequence, press the SEQUENCE button topause the sequence that is being run on the monitorscreen.The indicator in the button blinks to indicate that thesequence is paused.SEQUENCE