30r Warning DisplayDisplays the status in case of Disk Recorder trouble.THERMAL ✽: Indicates that the Disk Recorder’s tem-perature is rising.HDD ✽✽%: Is displayed when the remaining space ofthe Hard Disk reaches a specified value.(✽✽ indicates the remaining capacity.)OVERWRITE: Indicates that data are being overwrittenduring a recording.DISK FULL: Is displayed when the remaining space ofthe Hard Disk reaches 0 %.DVD ✽✽%: Indicates the remaining space of the DVD-RAM Disk. (✽✽ indicates the remaining capacity.)ALTERED: Is displayed when the recorded data arealtered.ERROR ✽-✽ : Indicates access error of the Hard Disk.(✽-✽ indicates the Hard Disk number in the DiskInformation menu)ERROR: Indicates that the other errors have occurred.t System Status DisplayDisplays the system status of the Disk Recorder.5: Indicates that data are being played back.5 X✽: Indicates that data are being played back withthe search function.(* indicates the search speed value)y : Indicates that the playback is being paused.N/W 5: Indicates that data are being transmitted to anetwork.COPYING: Indicates that data are being copied.LOCKED: Indicates that the buttons are locked.BUSY: Indicates that the line is busy.y Group DisplayDisplays the selected group (G1, G2, G3, G4).When all groups are selected, the display is disabled.u Electronic Zoom DisplayDisplays to indicate that the zooming mode is selected.ZOOM X✽: Indicates that the electronic zoom mode isselected (✽ indicates a value)i Group Title DisplayDisplays the group title edited in the setup menu.o Camera Title DisplayDisplays the camera title edited in the setup menu.It can also enable the alarm display set in the setupmenu when an alarm is activated.ALARM: Receives an alarm from the ALARM port.VMD: Detects a motion on the imageCH✽✽LOSS: Detects a video signal loss has occurred.