Section 2: General operation Series 2280 Precision Measurement DC Power Supplies Reference Manual2-72 077085501 / February 2015Save a user setupYou can save a user setup to internal nonvolatile memory or an external USB flash drive.To save a user setup to internal nonvolatile memory using the front panel:1. Configure the Series 2280 to the settings that you want to save.2. Press the MENU key.3. Under System, select Save/Recall.4. Select the button next to Save and press the ENTER key. The Save/Recall Location window isdisplayed.5. Select a location to save the setup and press the ENTER key. A keyboard is displayed.6. Use the keyboard to enter the name of the setup.7. Press the ENTER key. The setup is added to internal memory.To save a user setup to external USB flash drive using the front panel:1. Press the MENU key.2. Under System, select Save/Recall.3. Select the button next to Save and press the ENTER key. The Save/Recall Location window isdisplayed.4. Select Save to USB and press the ENTER key. A keyboard is displayed.5. Use the keyboard to enter the name of the setup.6. Press the ENTER key. The setup is saved to external USB flash drive.To save a user setup to internal nonvolatile memory using SCPI commands:Configure the instrument to the settings that you want to save. To save the setup, send thecommand:*SAV Where is an integer between 1 and 5.The setup saved through the *SAV command have the name SETUPx, where x is the value you setfor .To save a user setup to external USB flash drive using SCPI commands:Send the command::MMEMory:SAVE:SETup "mysetup"Save the present setup to the external USB flash drive as "mysetup".
