Keithley 2280 Series Reference Manual

Also see for 2280 Series: Quick start guide Reference manual Quick start guide

Contents

Keithley 2280 Series Reference Manual Manual pdf 264 page image

Series 2280 Precision Measurement DC Power Supplies Reference Manual Section 7: SCPI command reference077085501 / February 2015 7-79DetailSave the specified list to the USB flash drive.Make sure that the external USB flash drive is connected to the instrument before you send thiscommand. An unstable connection between the USB flash drive and the instrument will cause anerror 520: "No USB flash drive found".Example:LIST:SAVE:USB 1, "mylist" Export the list 1 to the external USB flash drive as "mylist".Also see[:SOURce[n]]:LIST:LOAD:USB (on page 7-72)[:SOURce[n]]:LIST:STATeThis command enables or disables the list mode.Type Affected by Where saved Default valueCommand and query Recall settingsInstrument resetPower cycleSave settings 0 (OFF)Usage[:SOURce[n]]:LIST:STATe [:SOURce[n]]:LIST:STATe? Channel number: For single-channel instruments, the value is 1. Enable the list mode: OFF or 0Disable the list mode: ON or 1DetailsThis command enables or disables the list mode.The list only works in the concurrent function. If the function is not concurrent, sending the[:SOURce[n]]:LIST:STATe command will result in the error 209, "Change Sense Function to V+I(CONCurrent) before running a list."