GE PACSystems RX7i Cpu Programmer's Reference Manual

Also see for PACSystems RSTi-EP: Reference manual User manual

Contents

GE PACSystems RX7i Cpu Programmer's Reference Manual Manual pdf 415 page image

Chapter 9. Diagnostics400 PACSystems* RX7i, RX3i and RSTi-EP CPU Programmer's Reference Manual GFK-2950C9.4.5 Reset of, Addition of, or Extra Option Module (Group 8)The fault group Reset of, Addition of, or Extra Option Module occurs when an option module (LANinterface module, BTM, etc.) comes online, is reset, is hot inserted or a module is found in the rackbut is not configured.Action: Non-configurable.3, LAN Interface Restart Complete, Running UtilityThe LAN Interface module has restarted and is running a utility program.CorrectionRefer to the LAN Interface manual, GFK-0868 or GFK-0869 (previously GFK-0533).7, Extra Option ModuleNote: This fault is logged for an RX3i CPE310 that is configured as a CPU310, or a CPE330configured as a CPU320, because the RX3i system detects the embedded Ethernet moduleas an unconfigured module.Correction1) Update the configuration file to include the module.2) Remove the module from the system.E Hex/14 Decimal, Option Module Hot insertedThe CPU logs this fault when it detects hot insertion of an option module such as the LAN interfacemodule. No correction necessaryNote: When configuration is cleared or stored, a reset fault is generated for every intelligent optionmodule physically present in the system.