Chapter 9. DiagnosticsGFK-2950C February 2018 389Viewing I/O Fault DetailsTo see I/O fault details, click the fault entry. The detailed information box for the fault appears. (Toclose this box, click the fault.)Figure 21: I/O Fault Table Fault Entry Detail DisplayThe detailed information for I/O faults includes:I/O Bus When the module in the slot is a Genius Bus Controller (GBC), this number isalways one.Bus Address The serial bus address of the Genius device that reported or has the fault.Point Address Identifies the point on the I/O device that has the fault when the fault is apoint-type fault.Group Fault group is the highest classification of a fault. It identifies the generalcategory of the fault.Action Fatal, Diagnostic, or Informational. For definitions of these actions, refer toFault Actions and Fault Action Configuration.Category Identifies the category of the fault.Fault Type Identifies the fault type by number. Set to zero when not applicable to thecategory.Fault Extra Data Provides additional information for diagnostics by Technical Supportengineers. Explanations of this information are provided as appropriate forspecific faults in I/O Fault Descriptions and Corrective Actions.Fault Description Provides a specific fault code when the I/O fault category is a circuit fault(discrete circuit fault, analog circuit fault, low-level analog fault) or modulefault. It is set to zero for other fault categories.
