COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 9 INSTALLATION9-30RemarksFor service mode (*5*), see p. 11-246.Step1516171819202122WorkSet appropriate settings for thestandard mode to suit the needs ofthe user in user mode and servicemode (*5*). (Press the Reset keytwice to end service mode.)Remove the door switch actuator, andinstall the door tape (door stopper);then, close the front door.Clean up the area around themachine.Move the machine to the site ofinstallation, and adjust the twoadjusters.As necessary, turn ON the drumheater switch (by pushing it on theright side) to suit the environment.Store away the grip after removing itfrom the front of the pick-up sideunder the grip of the rear of the pick-up side.Install the four covers (3 large, 1small) of the grip assembly.As necessary, install the accessories(sorter, etc.) according to theirrespective Installation Procedure.Fill out the Service Sheet.
