CALREC Putting Sound in the Picture 43FIG 1 - SEND-ROUTE ASSIGNABLE PANEL MODE CONTROL LAYOUTThe Send-Route mode is also anassignable panel mode, in that itdisplays information for, and canadjust parameters of the currentlyassigned audio path.Like the Processing mode, the currentlyassigned path, and therefore the focusof the control panel is shown on the TFTscreen.This panel mode allows for the currentlyassigned path to be routed to the variousbuses / outputs that are available. TheTFT screen provides routing buttons anddisplays whilst the panel below providescolour coded rotary controls for sendlevels to applicable outputs, such asAuxs, Track sends and Direct outputs.Pressing down on a rotary encoderhighlights that send in the bottom row ofcontrols providing further options suchas pre-fader / post fader switching. Thelast two columns of control cells providepan controls for positioning of the path’soutput. See Fig 1.SEND-ROUTE
