Panasonic AK-HRP200G Operating Instructions Manual

Also see for AK-HRP200G: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Panasonic AK-HRP200G Operating Instructions Manual Manual pdf 6 page image

6Setup.modeSetup.modeSetup mode allows the user to make a variety of unit settings, and save and load scene files and user files.Normal operation is unavailable during setup mode operation. ROP menu (REMOTE OPERATION MENU) operation is not available either. Setup.mode.functionsSetup mode allows you to do any of the following.The functions for camera recorder (serial connection) are identical to those for camera recorder (IP connection).Item Adjustable.range DisplayROP.Serial.connection.mode ROP.IP.connection.modeCCU.(serial.connection)Remote.camera.(serial.connection)CCU(serial.connection)Remote.camera.(serial.connection)CCU.(IP.connection)Remote.camera.(IP.connection)Camera.recorder.(IP.connection)1 Set camera number Sets a camera number. 2 Save scene file to/load scene file frommemory cardSaves the currently used scenefile to a memory card. It alsoallows you to load a scene filestored on a memory card.  3 Save user file to/load user file frommemory cardSaves the currently used userfile to a memory card. It alsoallows you to load a user filestored on a memory card.  4 Save lens file to/load lens file frommemory cardSaves the currently used lensfile to a memory card. It alsoallows you to load a lens filestored on a memory card.  5 Save ROPconfigurationfile to/load ROPconfiguration filefrom memory cardSave a configuration file forthe unit to a memory card.It also allows you to load aconfiguration file for the unitstored on a memory card.      6 Format memorycardFormats a memory card       7 Select/set flare andpedestalSelects the flare and pedestalcontrol function      8 Set buzzer (beep/call tone)Enables or disables the buzzeror call tone.      9 Set displaybrightness (LED/7-segment display)Sets the brightness of the panelLED and 7-segment display.      10 Set IP address Sets the IP address of the unit       11 Set subnet mask Sets the subnet mask of the unit.       12 Set default gateway Sets the default gateway of theunit.      13 Set port Sets the port of the unit.       14 Save/loadremote cameraconfiguration fileSaves the data recorded by theremote camera to a memory card.It also allows you to load a camerafile stored on a memory card.15 Set serial Switches between the CCUserial, remote camera serial andcamera recorder serial when theunit is in serial connection mode. 16 Initialize settings Initializes unit settings.       17 Confirm version Displays the version of thesoftware used by the unit.      18 Save unit data tomemory cardSaves unit data to a memorycard.      19 Upgrade software Upgrades the software used bythe unit.      20 Set tally number Sets the camera number toassign to tally input.   21 Set tally output Enables or disables tally output.    22 Syncro shutterdisplay settingWhen using syncro shutter,switches between SEC andDEG display.23 Tally control setting Specifies whether tally control isperformed via panel operationsor preview terminal inputs.The setup mode menu differs depending on the operation mode and connection configuration.