Panasonic AK-HRP200G Operating Instructions Manual

Also see for AK-HRP200G: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Panasonic AK-HRP200G Operating Instructions Manual Manual pdf 29 page image

29ROP.menu.setting. (continued)Item Display FunctionUP.CONVERT.MODESCSQLBSelects the video up-conversion system usedfor SD SDI and VBS returnvideos.Select the signal format forinput.HD.COLOR.BAR FULLBARS-1ARIBBARS-2BARS-3BARS-4BARS-5BARS-6Select the color bar signals to beoutput from the HD/SD SDI OUTconnectors and VBS connectorwhen “BAR” has been selectedon the operation panel of theROP.When they are output in VBSor SD format, color bars in HDformat are output in the modespecified withDOWNCONVERT MODE.FULL:75 % full field color barBARS-1:Color bar based on theSMPTE standardARIB:ARIB multi-format color barBARS-2:Color bar based on the EIAJstandardBARS-3:Split field color barBARS-4:75 % full field color bar placedin an area with a 4:3 aspectratio.(Displayed 40 % gray outsidethe area.)BARS-5:Color bar based on theSMPTE standard that isplaced in an area with a 4:3aspect ratio.(Displayed 40 % gray outsidethe area.)BARS-6:Color bar based on the EIAJstandard that is placed in anarea with a 4:3 aspect ratio.(Displayed 40 % gray outsidethe area.)PATHO OFFONSelect ON/OFF for thepathological signals.SDI3-4.OUT NORMALPMSelects the signals output fromthe 3rd and 4th HD/SD SDIsignal output connectors on aCCU.SYSTEM.(2/2)→ ＊＊ＳＹＳＴＥＭ（２／２）＊＊ＨＤＨＰＨＡＳＥＳＤＨＰＨＡＳＥＳＤ－ＨＤＶＭＩＣ１ＭＩＣ２ＧＡＩＮＡＭＰ６０dB６０dB０dB０dB０Ｈ００( indicates factory default settings.)Item Display FunctionHD.H.PHASE -1099׀0׀1099.(59.94.Hz)-1319׀0׀1319.(50Hz)Adjusts the horizontal phase ofHD SDI video for the genlockreference phase.SD.H.PHASE -857׀0׀857.(59.94Hz)-863׀0׀863.(50Hz)Adjusts SD horizontal syncphase.SD-HD.V 0HADVANCE0H_SD_DLAY.Set the vertical phase of theHDTV output in relation to theSDTV output.0H:Sets the vertical phase to thesame phase.ADVANCE:When the field frequency is59.94 Hz, the phase advanceis 90H.When the field frequency is 50Hz, the phase advance is 75H.0H_SD_DLAY:The SDTV signals are delayedand set in-phase with theHDTV signals.• When the setting of this itemis set to “0H” or “ADVANCE”while the field frequency is50 Hz, images in SD formatare delayed by 1 frame + 75lines only when letterbox isselected for DOWNCONVERTMODE.For the relationship with thesync phase, refer to OperatingInstructions Settings> of AK-HCU200.ADVANCE:. 59.94Hz→90H. 50Hz→75HMIC1.GAIN 20dB40dB60dBPerforms coarse adjustment ofMIC1 gain.