Panasonic AK-HRP200G Operating Instructions Manual

Also see for AK-HRP200G: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Panasonic AK-HRP200G Operating Instructions Manual Manual pdf 30 page image

30ROP.menu.setting. (continued)Item Display FunctionMIC1.AMP -20dB׀0׀20dBMakes fine adjustments of theMIC1 gain.(in.1.dB.increments)MIC2.GAIN 20dB40dB60dBMakes coarse adjustments ofMIC2 gain.MIC2.AMP -20dB׀0׀20dBMakes fine adjustments of MIC2gain.(in.1.dB.increments)FUNCTION→ ＊＊ＦＵＮＣＴＩＯＮ＊＊ＡＬＣＬＥＢＥＬＡＬＣＳＰＥＥＤＡＬＣＷＩＮＤＯＷＡＬＣＰＥＡＫＡＬＣＲＡＮＧＥＡＳＵＳＥＴＵＰＡＳＵＲＥＦＦＩＬＥＡＳＵＭＡＳＴＥＲＰＥＤＳＥＴＡＳＵＦＩＬＴＥＲＴＡＬＬＹＧＵＡＲＤ５０１５１６０ＮＯＲＭＡＬＯＵＴＦＵＬＬＦＡＣＴＯＲＹ２．０％ＲＥＦＯＦＦ( indicates factory default settings.)Item Display FunctionALC.LEVEL 0׀50׀100Adjusts the auto iris level of thelens iris.ALC.SPEED 1׀15׀25Sets the feedback speed of theauto iris.Feedback speed increases asthe numbers increase.ALC.WINDOW 1׀4Sets the image detection areawindow for the auto iris.ALC.PEAK 0׀60׀100Sets the ratio between theaverage and peak values of autoiris image detection.ALC.RANGE NORMAL3/42/41/4Sets the correction range foradjustments of the iris levelusing the IRIS knob to move theiris lever  )> in autoiris mode.ASU.SETUP OUT.FULLOUT.EASYSelects the auto setup modesetting.ASU.REF.FILE FACTORYUSER1USER2USER3Selects the file to be referencedwhen auto setup has beenstarted.ASU.MASTER.PED.SET0.0%׀2.0%׀7.5%Sets the position where themaster pedestal is to beconverged when auto setup isstarted.Item Display FunctionASU.FILTER REFCURRENTSets the operation of the NDfilter when auto setup is started.REF:The filter stored in thereference file is used whenoperation starts.CURRENT:Auto setup starts at the filterposition made prior to startup.TALLY.GUARD OFFONAt the ON setting, this functiondisables automatic ASU, AWB,ABB operation while the tallyis ON.LENS.FILE/EDIT.(1/2)→ ＊＊ＬＥＮＳＦＩＬＥ／ＥＤＩＴ（１／２）＊＊ＭＯＤＥＦＩＬＥＮＯＦＩＬＥＮＡＭＥＥＸＥＣＵＴＥＬＯＡＤＯＦＦＮＯ？( indicates factory default settings.)Item Display FunctionMODE LOADSTORESaves current lens files in thecamera (STORE) or loads(LOAD) lens files stored in thecamera.FILE.NO. zWhen [LOAD]is selected as[MODE]OFF1׀32zWhen [STORE]is selected as[MODE]1׀32Selects the lens file number.FILE.NAME Up.to.8.charactersUse to enter the file name.• It is disabled when [LOAD] isselected in [MODE].Allowable.characters0.-.9,.A.-.Z,.a.-.z,.._.(under.bar),..(space)EXECUTE YES?NO?Executes processes selected inMODE.