33IP.connection. (continued)How.to.Start.the.SoftwareVisit the product support desk of the following website to download thesoftware.http://pro-av.panasonic.net/ Installing.Easy.IP.Setup.Software..Easy IP Setup Software cannot be used with camera recorders.1..Download.the.zip.file.for.Easy.IP.Setup.Software.(EasyIPSetup.exe).from.the.website's.product.support.desk.2..Double-click.the.downloaded.zip.file.and.extract.it.Be sure to read "Readme.txt" before installing the software.3..Double-click."EasyIPSetup.exe".in.the."EasyIPSetup".folder.Easy IP Setup Software starts. Installing.ROP.Setup.Software1..Download.the.zip.file.for.ROP.Setup.Software.(ROPSetup.exe).from.the.website's.product.support.desk.2..Double-click.the.downloaded.zip.file.and.extract.it.Be sure to read "Readme.txt" before installing the software.3..Double-click."ROPSetup.exe".in.the."ROPSetup".folder.ROP Setup Software starts.Connecting.the.devicesConnect the ROP, CCU, remote cameras and camera recorders with IPconnections.Be sure to use a switching hub or similar device and connect thedevices with straight LAN cables.Turn on the power of each device.Connecting.and.setting.the.personal.computerConnect the personal computer with Easy IP Setup Software and ROPSetup Software installed with an IP connection.Configure the network settings of the personal computer.Configure the network settings of the personal computer for the samesegment as the devices being connected.The recommended settings are shown below.IP address:192.168.0.200• Change the IP address if it is a duplicate of that ofanother device.Subnet mask: 255.255.255.0Default gateway: 192.168.0.1Setting.the.IP.addresses.of.the.devices Configuring.the.settings.using.the.menusSet the IP address of the unit (ROP) in setup mode.No. Item Reference.page10 IP address page 1511 Subnet mask page 1512 Default gateway page 16For the IP addresses of the CCU, remote cameras and camerarecorders, refer to the operating instructions of the correspondingdevices. Configuring.the.settings.using.Easy.IP.Setup.SoftwareUse Easy IP Setup Software to set the IP address of each device.(→page 35)Configuring.various.settings.of.the.ROPUse ROP Setup Software to configure various settings. (→page 35)
