Panasonic AK-HRP200G Operating Instructions Manual

Also see for AK-HRP200G: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Panasonic AK-HRP200G Operating Instructions Manual Manual pdf 28 page image

28ROP.menu.setting. (continued)Item Display FunctionMEM.A.WIDTH 0׀255Expands the width of skin toneareas in memory bank A in arange from 0 to 255.MEM.A.SATU 0׀255Changes the saturation of skintone areas in memory bank A ina range of 0 to 255.MEM.B.CRISP -63׀0׀63Removes very faint noisecomponents from detailcomponents in skin tone areasin memory bank B.MEM.B.PHASE 0׀359Changes the color phase of skintone areas in memory bank B ina range of 0 to 359 on a vectordisplay.MEM.B.WIDTH 0׀255Expands the width of skin toneareas in memory bank B in arange from 0 to 255.MEM.B.SATU 0׀255Changes the saturation of skintone areas in memory bank B ina range from 0 to 255.ZEBRA.SWITCH OFFABA+BAdds a zebra pattern to theY signals of the PM output tomake areas subject to skin tonedetail effects easily visible.EFFECT.MEMORYABA+BSelects the memory bank towhich skin tone detail effects willbe added.SD.DETAIL→ ＊＊ＳＤＤＥＴＡＩＬ＊＊ＤＥＴＡＩＬＳＷＩＴＣＨＶＤＥＴＡＩＬＨＤＥＴＡＩＬＣＲＩＳＰＰＥＡＫ１ＰＥＡＫ２ＬＥＶＥＬＤＥＰＥＮＤＥＮＴＤＡＲＫＤＥＴＡＩＬＯＮＯＦＦ３５％１５０３．１７Ｍ( indicates factory default settings.)Item Display FunctionDETAIL.SWITCH ONOFFEnables or disables changes incontour enhancement (hard/soft)level of SDTV video output.V.DETAIL 0׀3׀63Adjusts the amount of verticaldetail.H.DETAIL 0׀5׀63Adjusts the amount of horizontaldetail.CRISP 0׀63Sets the maximum amplitude ofthe very faint noise componentsthat are removed from detailcomponents.PEAK1 1.89M/2.18M/2.56M/3.17M/4.0M/5.28M/6.75MSelects one of the two contourcorrection frequency bands(boost frequency or peakfrequency). Changes the contourwidth.Item Display FunctionPEAK2 OFF/1.89M/2.18M/2.56M/3.17M/4.00M/.5.28M/6.75MSelects one of the two contourcorrection frequency bands(boost frequency or peakfrequency). Changes the contourwidth.LEVEL.DEPENDENT0׀5.%׀30.%Lowers the detail in dark areas.It adjusts the level.DARK.DETAIL 0׀1׀5SYSTEM.(1/2)→ ＊＊ＳＹＳＴＥＭ（１／２）＊＊ＲＥＴＵＲＮ１ＲＥＴＵＲＮ２ＲＥＴＵＲＮ３ＲＥＴＵＲＮ４ＲＥＴＵＲＮ・ＤＥＬＡＹＤＯＷＮＣＯＮＶＥＲＴＭＯＤＥＵＰＣＯＮＶＥＲＴＭＯＤＥＨＤＣＯＬＯＲＢＡＲＰＡＴＨＯＳＤＩ３－４ＯＵＴＨＤＳＤＩ１ＨＤＳＤＩ２ＨＤＳＤＩ１ＨＤＳＤＩ２ＮＯＲＭＡＬＳＣＡＲＩＢＯＦＦＰＭＳＣ( indicates factory default settings.)Item Display FunctionRETURN1 HD.SDI1HD.SDI2SD.SDI1SD.SDI2VBSSets the input allocations ofreturn signal 1.*1RETURN2 HD.SDI1HD.SDI2SD.SDI1SD.SDI2VBSSets the input allocations ofreturn signal 2.*1RETURN3 HD.SDI1HD.SDI2SD.SDI1SD.SDI2VBSSets the input allocations ofreturn signal 3.*1RETURN4 HD.SDI1HD.SDI2SD.SDI1SD.SDI2VBSSets the input allocations ofreturn signal 4.*1RETURN.·.DELAYNORMALSHORTSelects whether a RET displayvideo will be delayed by 1 F(NORMAL) or by the shortestpossible period (SHORT).DOWN.CONVERT.MODESCSQLBSelects the down-conversionsystem for video output from SDSDI and VBS.*1 The items that can be selected as the display range differ dependingon the setting of [OPERATION]-[SETTING1]-[SDI RETURN1]/[SDIRETURN2] of HCU200.[HD] and [SD] in [SDI RETURN1] of HCU200 are linked to [HD SDI1]and [SD SDI1] of the unit.[HD] and [SD] in [SDI RETURN2] of HCU200 are linked to [HD SDI2]and [SD SDI2] of the unit.For example, when [HD] is set in [SDI RETURN1] of HCU200, [HDSDI1] can be selected but [SD SDI1] cannot be selected on the unit.