NEC PlasmaSync 42PD3 User Manual

Also see for PlasmaSync 42PD3: Brochure & specs

Contents

NEC PlasmaSync 42PD3 User Manual Manual pdf 43 page image

P LASMA M ONITOR † 43Other Functions (OTHER SETTINGS)Set [OSD MODE] to [PRO] on the configuration menu, then per-form the following operations.Preparation Press the PROCEED button to display the mainmenu.41 Align the cursor with23Move the cursor left and right withthe POSITION/CONTROL buttons.COLOR SYSTEMP-ON MODEPOWER MANAGERSET ID NORGB3 ADJUSTCINEMA PULLDOWNSTD/CINEMAALL RESET: AUTO: OFF: ALL: 1: ON: STD: LAST MEM: AUTO: OFF: ALL: 1: ON: STDCOLOR SYSTEMP-ON MODEPOWER MANAGERSET ID NORGB3 ADJUSTCINEMA PULLDOWNSTD/CINEMAALL RESET: LAST MEMAlign the cursor with SET ID NOSet the ID number with thePOSITION/CONTROL buttonsMove the cursor up and down withthe POSITION/CONTROL buttons.Press the EXIT button 2 timesPress the EXIT button one time to return to the main menu.One further press removes the menu.* Aligning the cursor with [ALL RESET] and pressing the PRO-CEED button will return all the settings of the other functionsto the default settings. (The ID number will become [ALL].)ID Number Setting (SET ID NO)[ALL] : ID number will not be set.[001 to 256]: ID number will be set.Adjust this setting when the RGB 3 image is not stable.Set [OSD MODE] to [PRO] on the configuration menu, then per-form the following operations.Preparation Press the PROCEED button to display the mainmenu.1 Align the cursor with23Move the cursor left and right withthe POSITION/CONTROL buttons.COLOR SYSTEMP-ON MODEPOWER MANAGERSET ID NORGB3 ADJUSTCINEMA PULLDOWNSTD/CINEMAALL RESET: AUTO: OFF: ALL: 1: ON: STD: LAST MEM: AUTO: OFF: ALL: 1: ON: STDCOLOR SYSTEMP-ON MODEPOWER MANAGERSET ID NORGB3 ADJUSTCINEMA PULLDOWNSTD/CINEMAALL RESET: LAST MEMAlign the cursor with RGB 3 ADJUSTUse the POSITION/CONTROL buttons to setthe number that provides the best imageMove the cursor up and down withthe POSITION/CONTROL buttons.RGB 3 Adjustment (RGB 3 ADJUST)4 Press the EXIT button 2 timesWhen the screen is not stable at [1] (the initial value), set theadjustment to [2] or [3].Press the EXIT button one time to return to the main menu.One further press removes the menu.* Aligning the cursor with [ALL RESET] and pressing the PRO-CEED button will return all the settings of the other functionsto the default settings.Note:Making this adjustment will cause the display position to change. To com-pensate, set [AUTO PICTURE] (of the [Auto Picture/Wide Screen Settings])to [OFF] and then to [ON], or readjust the display position.ImportantWhen using more than one of these monitors, this function sets ID numbersso that operation of the remote control does not cause multiple monitors tooperate at the same time.(These ID numbers can also be used for control with RS-232C.)The optional remote control is required to operate the plasma monitors foreach ID number independently. (These ID numbers also need to be assigned.)