NEC PlasmaSync 42PD3 User Manual

Also see for PlasmaSync 42PD3: Brochure & specs

Contents

NEC PlasmaSync 42PD3 User Manual Manual pdf 40 page image

40 †PLASMA MONITOR42Other Functions (OTHER SETTINGS)This function sets the color system (to AUTO, 3.58 NTSC, PAL,SECAM, or 4.43 NTSC).Set [OSD MODE] to [PRO] on the configuration menu, then per-form the following operations.Preparation Press the PROCEED button to display the mainmenu.1 Align the cursor with3Move the cursor left and right withthe POSITION/CONTROL buttons.COLOR SYSTEMP-ON MODEPOWER MANAGERSET ID NORGB3 ADJUSTCINEMA PULLDOWNSTD/CINEMAALL RESET: AUTO: OFF: ALL: 1: ON: STD: LAST MEMCOLOR SYSTEMP-ON MODEPOWER MANAGERSET ID NORGB3 ADJUSTCINEMA PULLDOWNSTD/CINEMAALL RESET: AUTO: OFF: ALL: 1: ON: STD: LAST MEMAlign the cursor with COLOR SYSTEMSet the color system with the POSITION/CONTROL buttonsMove the cursor up and down withthe POSITION/CONTROL buttons.Press the EXIT button 2 timesPress the EXIT button one time to return to the main menu.One further press removes the menu.* Aligning the cursor with [ALL RESET] and pressing thePROCEED button will return all the settings of the otherfunctions to the default settings.Color System Settings (COLOR SYSTEM)[AUTO] : Automatically detects the color system andselects it.[3.58 NTSC] : Standard system for mainly North America andJapan.[PAL] : Standard system for mainly the UK and Germany.[SECAM] : Standard system for mainly France and Russia.[4.43 NTSC] : System mainly used in VTRs in PAL/SECAMregions.Preparation Press the PROCEED button to display the mainmenu.123Move the cursor left and right withthe POSITION/CONTROL buttons.COLOR SYSTEMP-ON MODEPOWER MANAGERSET ID NORGB3 ADJUSTCINEMA PULLDOWNSTD/CINEMAALL RESET: AUTO: OFF: ALL: 1: ON: STD: LAST MEM: AUTO: OFF: ALL: 1: ON: STDCOLOR SYSTEMP-ON MODEPOWER MANAGERSET ID NORGB3 ADJUSTCINEMA PULLDOWNSTD/CINEMAALL RESET: LAST MEMAlign the cursor with P-ON MODESet the P-ON MODE with the POSITION/CONTROL buttonsMove the cursor up and down withthe POSITION/CONTROL buttons.Power-On Mode Setting (P-ON MODE)The mode that is displayed will be as indicated below accord-ing to the setting of [Input Selection].[LAST MEM] : This is the input mode that was last selected(at the time the power was switched off).(Last Memory)[VIDEO] : This results in the VIDEO input mode.[RGB 1] : This results in the RGB 1 input mode.[RGB 2] : This results in the RGB 2 input mode.[RGB 3] : This results in the RGB 3 input mode.[DVD/HD] : This results in the DVD/HD input mode.[SCART] : This results in the SCART jack input mode.RGB 2RGBDVD/HDSCART OFFLAST MEM, VIDEO,RGB 1, RGB 2,RGB 3LAST MEM, VIDEORGB 1, HD/DVD,RGB 3ONLAST MEMVIDEO, RGB 1,SCART,RGB 3Align the cursor withThis function sets the input mode at the time the power is switchedon.Set [OSD MODE] to [PRO] on the configuration menu, then per-form the following operations.