NEC PlasmaSync 42PD3 User Manual

Also see for PlasmaSync 42PD3: Brochure & specs

Contents

NEC PlasmaSync 42PD3 User Manual Manual pdf 26 page image

26 †PLASMA MONITORConfiguration Menu (CONFIG MENU)This menu sets the main menu, display of adjustment details, remote control, sync, and the brightness of the multiple system.1 Align the cursor with the desired item23Move the cursor up and down withthe POSITION/CONTROL buttons.OSD DISPLAY :NORMALOSD MODE :BASICWIRELESS REMOTECONTROL :ONSYNC MODE :AUTOPLE LINK :OFFALL RESETCONFIG MENUOSD DISPLAY :KEYOSD MODE :BASICWIRELESS REMOTECONTROL :ONSYNC MODE :AUTOPLE LINK :OFFALL RESETCONFIG MENUPress the EXIT button one time to return to the config menu.One further press removes the menu.Adjust with the POSITION/CONTROL buttonsPress the EXIT button 2 timesAdjustment Items OSD DISPLAY[NORMAL] : Displays the menu screen and adjustment details.[KEY] : Displays the adjustment details for only input switch-ing and direct adjustments.[OFF] : No display of any menu screens or adjustment details. OSD MODE[BASIC] : Allows only the first page of the main menu to be displayed.[PRO] : Allows Pages 1 and 2 of the main menu to be displayed. WIRELESS REMOTE CONTROL[ON] : Enables remote control wireless transmission.[OFF] : Disables remote control wireless transmission.* This is normally left [ON]. Set [OFF] to avoid unwantedcontrol from other remote controls. SYNC MODE[AUTO] : Automatically detects separate sync signals,green sync signal (i.e., sync-on-green), andcomposite sync signal.[GSYNC] : Automatically detects green sync signal (i.e.,sync-on-green).[CSYNC] : Automatically detects composite sync signal. PLE LINK[ON] : Sets a uniform screen brightness for eachscreen in a 4-screen multiple system.[OFF] : Sets the screen brightness for each of thescreens in a 4-screen or multiple system to theirrespective brightness.* Set [OFF] in a 9-screen multiple system.* When this function is set [ON], connect four plasma moni-tors with the remote control cable (included with the op-tional remote control) in the order of the position numbersfor 4-screen multiple system. See the drawing below.Preparation Simultaneously press and hold the POSITION/CONTROL button and the PROCEED button for 3 seconds or longerto display the menu screen.Note:Please use the control panel of the main unit at this time sinceoperation with the remote control will not be enabled with thisarrangement.REMOTEINREMOTEINREMOTEOUTREMOTEOUTREMOTEINREMOTEOUTREMOTEOUTREMOTEINNo.1 No.2No.3No.4No.1 No.2No.3No.4No.1 No.2No.3No.4No.1 No.2No.3No.4Monitor MonitorMonitor Monitor ALL RESETAlign the cursor and then press the PROCEED button toreturn all adjustments and settings of CONFIG MENU to thefactory default values.