NEC PlasmaSync 42PD3 User Manual

Also see for PlasmaSync 42PD3: Brochure & specs

Contents

NEC PlasmaSync 42PD3 User Manual Manual pdf 25 page image

P LASMA M ONITOR † 25Menu OperationsButtons Used in Menu Operations PROCEED buttonDisplays the main menu.Determine the selection or set details in the mainmenu and proceed to the next step. EXIT buttonTurns off the main menu.Press during display of the sub menu to returnto the main menu.POWER OFFRGB 1POWER ONRGB 3RGB 2 / DVD / HDVIDEOEXIT PROCEEDPOSITION / CONTROLRP- 102 POSITION/CONTROL buttons button: Moves the cursor up. button: Moves the cursor down. button: Moves the cursor left.Press during display of the sub menu (set-ting/adjustment screen) to select setting itemsand also to decrease the adjustment value. button: Moves the cursor right.Press during display of the sub menu (set-ting/adjustment screen) to select setting itemsand also to increase the adjustment value.NOTE:CONFIG MENUAmong the various on-screen menus (OSM), only the CONFIG MENU is displayed by pressing and holding the main unitPOSITION/CONTROL button and the PROCEED button simultaneously for 3 seconds or longer.The menu screen of the CONFIG MENU does not contain icons that indicate menu items; however, operation is the same aswith other screens.Operation of the Menu ScreenMain menu Sub menuThe main menu comprises 2 pages (screens). Place the cursor onicon or and use the POSITION/CONTROL / button tochange the page. (Set [OSD MODE] to [PRO] on the configurationmenu before performing other operations.)VOLUMEBALANCEMUTEINPUT1INPUT2: OFF: VIDEO: RGB1 Items of the main menuare displayed as icons.See Pages 23 and 24 fordetails. Displays the next page. Place the cursor hereand press the buttonto display the next page.SOURCE INFO.RGB1H-FREQ.V-FREQ.H-POL.V-POL.31.5kHz60.0HzNEGPOS Items of the main menuare displayed as icons.See Pages 23 and 24 fordetails. Displays the previouspage.BRIGHTNESSCONTRASTSHARPNESSCOLORTINT Cursor Indication of theadjustment value.NOTE:Auto MemoryThe setting value is automatically stored after the adjustment. Note thatsetting values will not be automatically stored in the following circumstances.* The power cable is disconnected from the outlet during the setting.* There is a power outage during the setting.Perform operations with the remote control and main unit operation buttons.