NEC PlasmaSync 42PD3 User Manual

Also see for PlasmaSync 42PD3: Brochure & specs

Contents

NEC PlasmaSync 42PD3 User Manual Manual pdf 22 page image

22 †PLASMA MONITORBasic Operation To view a video source:Use the input selection menu to set [VIDEO] to [BNC] or [S-VIDEO].Press the VIDEO button.Displays the image from the equipment connected to the VIDEOIN connector.• See page 21 for connection. To view the image from a computer,DVD player or HD laser disc player:Select [RGB] or [DVD/HD] for RGB 2 from the INPUT SELECTmenu.Press the source button (RGB 1, RGB 2/DVD/HD, or RGB 3)Displays the image from the computer, DVD player or HD laserdisc player connected to the selected RGB input connector.• You can select the source also by using the RGB button on thefront panel.To do this, each press of the RGB button selects [RGB 1] →[RGB 2] or [DVD/HD] → [RGB 3] in sequence.• See page 14 for connection.NOTE:* The default input is the last input used, but the plasma monitor can beconfigured to display either the last input used or a preset input when-ever it is used turned on. (See "Power-On Mode Setting" on page 40.)* During RGB3 mode the power management function is available in Off-state only. (This is Active-off Power state in DMPM of DVI standard.)An image will be displayed in 4 seconds after TMDS signal is returned.ImportantNotes on the POWER/STANDBY light on the plasma monitor* When the indicator light flashes at a time other than during timer setting,it indicates a fault of the monitor.Should this happen, immediately switch off the main power of the moni-tor, disconnect the power plug from the outlet, and request repair ser-vice from your dealer.Selecting a computer or video source POWER/STANDBY Light StatusNormalErrorMain Power ONTimer enabledPower OFF with remote controlMain Power StandbyAbnormal heat warningCracked panel glassGreenOrange flashingOrangeOrangeGreen flashingGreen and/or Orange flashingStatus POWER/STANDBY lightWhen Using Power Management FunctionNOTE: In some cases the fan may stop running. This is not a malfunction.This plasma monitor follows the VESA approved DPMS PowerManagement function.The power management function is an energy saving function thatautomatically reduces the power consumption of the display whenthe keyboard or the mouse has not been used for a fixed period.The status of power management can be checked by POWER/STANDBY light display.See page 42.